WECO HydroSense Residential Light Commercial or WECO MX-350 Commercial RO Water? Which WECO Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The weco hydrosense residential light commercial vs mx 350 commercial ro comparison helps you choose the right system for your needs. Both units serve residential and light commercial applications with reverse osmosis technology. They share pre-filtration stages for sediment and carbon. The main difference lies in their output capacity and added features. One model includes ultraviolet treatment and a booster pump. The other offers a higher daily volume without a pump.
Key differences
| Aspect | WECO HydroSense Light Commercial RO with UV | WECO MX-350 Alkaline RO System |
|---|---|---|
| Filtration Type | Reverse osmosis, UV | Reverse osmosis, alkaline |
| Capacity | Not listed | 350 GPD |
| Membrane | 1812 Volume Thin Film Composite | AXEON TF-3012-500 |
| Features | Booster pump, UV filter | Alkaline filter, digital TDS monitor |
| Dimensions | 15 x 34 x 20 inches | 10 x 22 x 18 inches |
Which one should you choose?
Choose WECO HydroSense Light Commercial RO with UV if
- You need ultraviolet sterilization to eliminate bacteria.
- You have lower water pressure and require a booster pump.
- You prefer a system with a remineralization filter.
Choose WECO MX-350 Alkaline RO System if
- You require a higher daily output of 350 gallons.
- You want to naturally balance pH levels with calcium minerals.
- You need a compact unit with a digital TDS monitor.
Verdict: Choose the HydroSense if your priority is water sterilization and you have low inlet pressure. Select the MX-350 if you need higher volume production and pH adjustment. Both systems provide effective contaminant removal for your specific use case.
HydroSense vs MX-350 RO Specs
Production Capacity
The WECO HydroSense Light Commercial RO is rated for 500 gallons per day based on its model number HydroSense-0500GAC-CAL-UV. This higher output makes it suitable for settings with greater daily water demands. The WECO MX-350 Alkaline RO System produces 350 gallons per day. While sufficient for many light commercial uses, it has a lower maximum output than the HydroSense. You should choose the HydroSense if your facility requires higher volume production. The MX-350 is adequate for smaller offices or clinics with moderate usage needs. Both systems handle residential and light commercial applications effectively within their respective limits.
Filtration Technology
The HydroSense includes an ultraviolet (UV) filter as a key feature for post-treatment. This adds a disinfection stage to remove bacteria and viruses after the reverse osmosis membrane. It also uses a remineralization filter. The MX-350 uses an alkaline filter that adds calcium minerals to balance pH. It does not list UV treatment. The MX-350 includes a digital dual TDS monitor with a 0-9990 ppm range for quality tracking. If you need germicidal protection, the HydroSense is the better choice. If you prefer pH balancing and digital monitoring without UV, the MX-350 fits your needs.
Membrane Specifications
The HydroSense uses a standard 1812 Volume Thin Film Composite reverse osmosis membrane. It removes up to 98.5% of contaminants. The MX-350 uses an AXEON TF-3012-500 membrane. It removes up to 98% of contaminants. The HydroSense membrane has a slightly higher stated removal percentage. Both membranes target nitrate, TDS, fluoride, lead, sodium, and mercury. The MX-350 membrane is a specific commercial-grade model. The HydroSense membrane is a standard commercial size. The difference in removal percentage is minimal for most users. Both systems provide high-purity water through their respective membrane technologies.
Physical Dimensions
The HydroSense measures 15 inches wide, 34 inches high, and 20 inches long. It weighs 70 pounds. The MX-350 measures 10 inches wide, 22 inches high, and 18 inches long. The MX-350 is significantly smaller and more compact. It saves floor space in tight utility areas. The HydroSense is taller and heavier, requiring more room and a sturdy stand. You should select the MX-350 if space is limited. The HydroSense requires more vertical clearance. Both units are designed for floor-standing installation in commercial or residential settings.
System Design
The HydroSense is not a complete whole house system. It requires atmospheric tanks, jet pumps, and other equipment for whole-house setups. It includes a booster pump and automated water pressure sensors. The MX-350 is described as a pump-less high flow system. It does not list a booster pump in its features. The HydroSense relies on active pressure management. The MX-350 operates without a pump. This affects installation complexity and energy use. You need to account for separate tank purchases for the HydroSense. The MX-350 design is simpler regarding pump requirements.
Which WECO RO System Fits Your Needs
Users needing UV sterilization for safety
The HydroSense includes an ultraviolet water filter system. This feature adds a critical sanitation layer that the MX-350 lacks. If you require pathogen elimination alongside standard contaminant removal, the UV treatment ensures the purest water. The system also uses a booster pump to maintain capacity, making it ideal for light commercial settings where safety and flow matter.
Buyers wanting alkaline mineral balance
The MX-350 features an alkaline filter that naturally balances pH by adding calcium minerals. This post-filtration step improves taste and mineral content without electricity. It includes a commercial digital in-line dual TDS monitor for precise water quality tracking. This model is perfect if you prefer mineral-enhanced water and want to monitor purity levels directly.
Those prioritizing compact physical dimensions
The MX-350 measures 10 inches wide by 22 inches high and 18 inches long. It is significantly smaller than the HydroSense, which is 15 inches wide and 34 inches high. If you have limited installation space or need a unit that fits in a tighter cabinet, the MX-350’s compact footprint offers a practical advantage for your setup.
The products compared
WECO HydroSense Light Commercial RO with UV
Best for: Light commercial spaces needing UV treatment
- Design
- Not a complete whole house system
- Filtration Type
- Reverse osmosis, UV
- Features
- Booster pump, UV filter
- Use
- Light Commercial
- Dimensions
- 20 × 15 × 34 inches
- Weight
- 70 pounds
View on Amazon: WECO HydroSense Light Commercial RO with UV Affiliate link
The WECO HydroSense is a residential and light commercial reverse osmosis system with ultraviolet treatment. It uses a standard 1812 membrane to remove up to 98.5% of contaminants. The unit includes a booster pump and UV filter for added purification. It measures 15 by 20 by 34 inches and weighs 70 pounds. This system suits medical offices, schools, and laboratories. It is not a complete whole-house solution.
Pros
- UV filtration for added pathogen control
- Booster pump maintains maximum capacity
- Removes up to 98.5% of contaminants
- Granular activated carbon post-filtration
Cons
- Not a complete whole-house system
- Requires separate atmospheric tanks
- Heavier build at 70 pounds
Good fit if
- You need UV treatment for light commercial use
- You require high contaminant removal rates
- You have space for a 70-pound unit
Skip if
- You want a complete whole-house setup
- You need a compact under-sink unit
- You prefer a lighter system under 50 pounds
Verdict: The WECO HydroSense UV RO System delivers robust purification with UV treatment and a booster pump. It fits light commercial spaces like labs or schools that need dedicated water quality control.
WECO MX-350 Alkaline RO System
Best for: High-output alkaline water needs
- Capacity (GPD)
- 350 GPD
- Filtration Type
- Reverse osmosis, alkaline
- Features
- Alkaline Filter
- Use
- Light Commercial
- Dimensions
- 18 × 10 × 22 inches
View on Amazon: WECO MX-350 Alkaline RO System Affiliate link
The WECO MX-350 is a pump-less reverse osmosis system with a 350 gallons per day capacity. It uses an AXEON membrane to remove contaminants and includes an alkaline filter to add calcium and balance pH. A digital dual TDS monitor tracks water quality. This unit suits light commercial or high-demand residential use where you need steady flow without a booster pump.
Pros
- 350 GPD capacity for high-volume use
- AXEON membrane removes up to 98% of contaminants
- Alkaline filter adds calcium minerals
- Digital dual TDS monitor included
Cons
- No booster pump included
- Large footprint measures 18 by 10 by 22 inches
- No UV sterilization stage
Good fit if
- You need high daily output
- You want alkaline minerals in your water
- You prefer pump-less operation
Skip if
- You require UV purification
- You have limited under-sink space
- You need a booster pump
Verdict: The WECO MX-350 Alkaline RO System delivers high output without a pump. It fits light commercial settings or homes needing alkaline water.
Specifications side by side
| Spec | WECO HydroSense Light Commercial RO with UV | WECO MX-350 Alkaline RO System |
|---|---|---|
| Capacity (GPD) | not stated | 350 GPD |
| Design | Not a complete whole house system | not stated |
| Filtration Type | Reverse osmosis, UV | Reverse osmosis, alkaline |
| Features | Booster pump, UV filter | not stated |
| Use | Light Commercial | Light Commercial |
| Dimensions | 20 × 15 × 34 inches | 18 × 10 × 22 inches |
| Weight | 70 pounds | not stated |
| Size | HydroSense-0500GAC-CAL-UV | RO-ALKALINE |
| Model | HydroSense-0500GAC-CAL-UV | MX-350ALK |
| Color | not stated | Clear/Blue/White |
Frequently asked questions
Does the WECO HydroSense have a booster pump?
Yes, the WECO HydroSense Light Commercial RO with UV includes a booster pump. This component helps maintain consistent pressure and flow rates. It ensures the system performs well even if your incoming water pressure is low. This feature supports its use in light commercial environments where steady output is critical.
Is the MX-350 system pump-free?
The WECO MX-350 Alkaline RO System operates without a booster pump. It relies on standard line pressure for its reverse osmosis process. This design makes it simpler to install in settings where adding electrical components for a pump is not desired. It fits light commercial or home use cases with adequate pressure.
What is the physical size difference between the two units?
The HydroSense unit measures 15 inches wide, 34 inches high, and 20 inches long. It weighs 70 pounds. The MX-350 is more compact, measuring 10 inches wide, 22 inches high, and 18 inches long. The HydroSense is significantly taller and heavier, requiring more vertical space and floor support.
Which model provides alkaline water benefits?
The WECO MX-350 Alkaline RO System includes an alkaline filter. This stage adjusts the pH level of the purified water. The HydroSense model focuses on UV sterilization and standard contaminant removal instead. If you prefer alkaline water for taste or health reasons, the MX-350 is the specific choice.
Can the HydroSense remove bacteria and viruses?
Yes, the WECO HydroSense Light Commercial RO with UV features UV filtration. Ultraviolet light neutralizes bacteria, viruses, and other microorganisms. This adds a sanitation layer that standard reverse osmosis membranes do not provide. It is ideal for labs or schools needing dedicated water quality control against pathogens.
Which system is better for a school lab?
The WECO HydroSense is better suited for school labs. It includes UV treatment for pathogen elimination. Schools often require strict sanitation standards for drinking water. The HydroSense provides this extra safety layer alongside its 500-gallon daily capacity, ensuring both high volume and high purity for educational facilities.
Does the MX-350 need electrical power for the pump?
No, the MX-350 does not use a booster pump. Therefore, it does not require electrical power for pumping water through the system. You only need power if the unit has other electronic components, but the core RO process is gravity and pressure-driven. This simplifies installation in remote or low-power areas.